Table of Contents
Advertisement
Pull Idler Pulley to the Right
Looking at Idler Pulley from Front of Dryer
4. Using the belt as a handle, lift the drum from
the cabinet.
NOTE: The felt on the front and back of the drum
are not separate parts. They come with the drum.
Electric Heater Assembly
The electric heater assembly has an upper
and lower heater in the housing, which comes
assembled together. It also has the inlet and high
limit thermostats mounted to the left side of the
heater housing.
Inlet
T-Stat
High
Limit
T-Stat
Heater Diagnosing
1. Disconnect power from the dryer.
2. Access the main board located under the top
panel.
3. Disconnect either the blue wire from the
normally open (N.0.) terminal of the K502
relay or the orange wire from the normally
open (N.0.) terminal of the K501 relay.
– 36 –
Electric
Heater
Assembly
Hide quick links:
Advertisement
Table of Contents
