Top Panel; Door; Door Reversal - Haier GE UltraFresh GFD55ESSN Technical Service Manual

6. Lay the control panel over to access and
disconnect the RJ45 connector and the user
interface (UI) wire connector from the control
panel. Notice the location of the mini manual.
RJ45
Connector
7. Disconnect the RJ45 from the control panel
by pushing inward on the connector tab.
Then roll the connector out of the control
panel.
Tab

Top Panel

Removal of the control panel provides access
to four 1/4-inch hex-head screws located at the
front edge of the top panel. After removal of the
screws, the panel can then be slid forward and
then lifted to disengage it from the cabinet.

Door

The door is fastened to the front panel using two
1/4-inch hex-head screws.
Mini
Manual
Once they are removed, lift the door upwards to
disengage the support hooks on the door hinge
from the front panel.

Door Reversal

WARNING: Shock Hazard
Unplug the appliance or turn off the circuit
breaker before servicing. Pressing the Power
pad DOES NOT disconnect power.
Tools Needed
• Phillips-head Screw-driver
• T-25 Torx-driver
• 1/4-inch Nut-driver
– 26 –