Table of Contents
Advertisement
EXAMPLE: the code to be inserted is 5 6 0 5 4. First digit 5 - Wait 5 flashes for the first digit. After
the fifth flash has been completed and the LED has turned OFF, immediately turn ON the ignition
key for 1 second. Turn the ignition OFF and after a pause, the LED will flash for the next digit of the
Pin Code; Second digit 6 - Wait 6 flashes for the second digit. After the sixth flash has been
completed and the LED has turned OFF, immediately turn ON the ignition key for 1 second. Turn
the ignition OFF and after a pause, the LED will flash for the next digit of the Pin Code; Third digits
0 - For the 0 digit, the flashes to be completed on the LED are 10. Continue until all the digits have
been displayed and inputted correctly.
CODE
TURN ON THE IGNITION FOR 1 SEC.
5 5 5 5 5
1
6 6 6 6 6
1
0 0 0 0 0
1
TURN ON THE IGNITION FOR 1 SEC.
5 5 5 5 5
1
TURN ON THE IGNITION FOR 1 SEC.
4 4 4 4 4
1
CODE
Note: If you use the Pin Code to disarm the alarm system, 30 seconds after turning OFF the ignition,
the alarm will automatically arm to ensure that the security of the motorcycle is not compromised.
14
2
3
4
TURN ON THE IGNITION FOR 1 SEC.
2
3
4
TURN ON THE IGNITION FOR 1 SEC.
2
3
4
2
3
4
4
2
3
CORRECT
AUDIBLE TONES AND VISUAL SIGNALS
WITHOUT ANY OPTICAL AND ACOUSTIC SIGNAL
ALARM ARMED, SIREN ON FOR 30 SEC. AND THEN IT IS
INCORRECT
POSSIBLE TO REPEAT THE EMERGENCY PROCEDURE
5
6
7
6
5
7
5
6
7
5
6
7
5
6
7
GARAGE FUNCTION ACTIVATED
ALARM DISARMS WITH
WITHOUT ANY TIME RESTRICTION AND
8
9
10
2" PAUSE
8
9
10
2" PAUSE
10
8
9
2" PAUSE
8
9
10
2" PAUSE
8
9
10
2" PAUSE
- Quick Links:
- Battery Replacement
Hide quick links:
Advertisement
Table of Contents
