Table of Contents
Advertisement
Wiring the Carrier® Connect™ Wi-Fi Thermostat
Attach the thermostat face by aligning it with the hinge guide on top of the back.
3
Turn on the 24 Vac power. The thermostat displays the HOME screen. See HOME (page 26) for details.
4
Configure your system as described in this document.
5
To connect a remote input (sensor or contacts)
NOTE Use the specified type of wire and cable for maximum signal integrity.
Power
Description
Conductor
Maximum length
Insulation
Thermistor
33CONNECTSTAT43
Installation Guide
N/A
Stranded, twisted pair
If < 100 ft (30.5 meters) 22 AWG, unshielded
If > 100 ft (30.5 meters) 22 AWG, shielded
500 feet (152 meters)
Plenum rated
10K Type II (CP/MCI)
6
©2022 Carrier.
All rights reserved.
Advertisement
Table of Contents
