Table of Contents
Advertisement
Using the Carrier® Connect™ Wi-Fi Thermostat's screens
LOCKOUT
Locks out unauthorized changes made on the touchscreen. All touch interaction is locked out without the unlock
code. After 5 failed attempts, a notification (fault) is sent to the registered owner of the thermostat through Wi-Fi.
More unlock attempts are blocked for 15 minutes.
To set up a new PIN or change the current PIN, select the ENABLE button or the CHANGE PIN button, which
displays on the SET PIN screen. If the thermostat does not already have a PIN, the CHANGE PIN button cannot be
used.
On the SET PIN screen, use the 3 blue-digit PIN wheels to set the PIN. Set the 3-digit PIN and press the orange
Save button to save the PIN and return to the LOCKOUT screen. Press the DISABLE button to cancel the LOCKOUT
function and reset the PIN to 000. The default is 000 and the range is 1 to 999.
CLEAN
Stops touchscreen interaction for 10 seconds to allow cleaning the screen with a dry nonabrasive cloth. A 10-
second countdown shows on the CLEAN screen and then resumes normal operation.
LOG
You can use this screen to view software update history, fault history, and system events. Swipe up or down on the
vertical yellow Row Indicator to scroll through logged events.
The log includes:
•
STARTUP
•
SOFTWARE UPDATE EVENTS
•
POWER CYCLE EVENTS
•
PARAMETER OUT-OF-RANGE EVENTS
•
SERVER CONNECTIVITY EVENTS
•
NON-VOLATILE MEMORY FAULTS
•
TEMPERATURE FAULTS
The list displays the 5 most recent logged events, with the most recent at the top. The last line in the list includes
the RESET LOG command to clear the list. Pressing an event item displays a screen with more information. Press
the BACK button to return to the LOG screen.
33CONNECTSTAT43
Installation Guide
34
©2022 Carrier.
All rights reserved.
Advertisement
Table of Contents
