Atdec AWMS-BT40 Installation Manual

Post Mounted Heavy Duty
Monitor Mount
G
M8 Stud
(x1)

COMPONENT CHECKLIST

AWMS-BT40-C
A
Post
(x1)
H
M4x10mm
Screw
(x4)

IMPORTANT INFORMATION

! Product should only be assembled and used as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Each bracket supports a maximum weight as per above capacity specification.
! Avoid applying downward load to corners of display.
! Product must only be installed on a solid work surface capable of supporting the weight of all equipment being mounted.
! This product is not suitable for outdoor use.
! Do not use this product for mobile applications.
! VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA locations exert additional leverage that
can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec
if you would like further information.
! WARNING! Death or serious injury may occur if a child climbs on or tips product.
H
M8x30mm
Screw
(x1)
AWMS-BT40-H
AWMS-BT40X-H
B
Bracket VESA Plate
(x1)
E
4mm 5mm
Hex Key Hex Key
(x1)
I
M4x20mm 10mm
Screw Spacer
(x4) (x4)
B
Bridge
(x1)
C D
Post Cap
(x1) (x1)
F G
M8x60mm
Screw
(x1) (x2)
J
Installation Guide
AWMS-BT40
C
Leg
(x2)
Clamp Plate
AWMS-BT40-G
AWMS-BT40X-G

REQUIRED TOOLS

• Phillips Head Screwdriver

CAPACITY

Flat Monitor
4.5 - 25kg
(10 - 55lb)
Curved Monitor
4.5 - 18kg
(10 - 40lb)
Display Size
24" - 55"
300mm (12") max
overall display depth
N
13mm
Spanner
(x1)
AWMS-BT40 Page 1 of 4
B C
Clam
(x1) (x
A
M8 Stud
(x1)