Bomag BPR 30/38-3 Operating Instructions And Maintenance Instructions page 44

Fig. 58
Disassemble the fuel tank.
l
For this purpose unscrew hexagon nut 1 (Fig.
l
58) and hexagon screw (2).
Fig. 59
Open hose clamp 1 (Fig. 59), pull the hose off.
l
Unscrew fuel screen (2).
l
Clean the fuel screen, check the condition of
l
the screen (holes), replace if necessary.
i
Note
For installation check gasket (3), screw the fuel
screen in tightly.
BPR 30/38-3 / BPR 35/38-3
4.19 Changing the oil in the vi-
brator shaft housing
Fig. 60
Unscrew the fastening nuts 1 (Fig. 60) for the
l
extension plates (2) and take the plates off
both sides.
Tilt the machine slightly towards oil drain side
l
and support it safely.
Fig. 61
Environment
Do not let old oil seep into the ground.
Unscrew oil drain plug (Fig. 61), drain and
l
catch running out old oil.
Turn the oil drain plug back in with a new seal
l
ring.
B O M A G
M a i n t e n a n c e e v e r y y e a r
4 3