Bomag BPR 30/38-3 Operating Instructions And Maintenance Instructions page 11

T e c h n i c a l D a t a
The following noise and vibration data acc. to
- EC Machine Regulation edition 98/37/EC and
- the noise regulation 2000/14/EC, noise protection guideline 2003/10/EC
- Vibration Protection Regulation 2002/44/EC
were determined during conditions typical for this type of equipment and by application of harmo-
nized standards.
During operation these values may vary because of the existing operating conditions.
Noise value
sound pressure level on the operator's stand:
L = 91 dB(A), determined acc. to ISO 11204 and EN 500
pA
Garanteed sound capacity level:
L = 105 dB(A), determined acc. to ISO 3744 and EN 500
WA
Danger
!
Loss of hearing!
Wear your personal noise protection means (ear defenders) before starting operation.
Vibration value
Hand-arm vibration:
Vector total of the weighted effective acceleration in three orthogonal directions:
Weighted total vibration value
2
a = 11.6 m/sec on crushed rock determined acc. to ISO 5349 and EN 500
hw
Caution
!
Observe the daily vibration load (Industrial safety acc. to 2002/44/EC).
1 0
B O M A G
BPR 30/38-3 / BPR 35/38-3