Cleaning The Device; Ce Marking; Certification Marking - Fujitsu P2410 Series Operating Manual

Cleaning the device

Switch off the device and unplug the power plug.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in mild domestic detergent and then carefully wrung out.

CE marking

The shipped version of this device complies with the requirements of EU directives 2014/30/EU
"Electromagnetic Compatibility", 2014/35/EU "Low voltage directive", 2009/125/EU "Ecodesign
directive" and 2011/65/EU "RoHS directive".
Certification marking
The certification mark is affixed near the VESA mounting surface. It becomes
visible once the stand is removed.
1
1 = Certification marking
Fujitsu
Important notes
9