Miscellaneous Lat Parameters - Bay Networks 5390 Administering

Configuring Hosts and Servers

Miscellaneous LAT Parameters

The LAT-specific na parameters can be changed, but are not necessary to access LAT services; only
the group_value, vcli_groups, and authorized_groups parameters are necessary for such access.
Because the timer and limit values affect performance, take care when adjusting them. For
convenience, the administrator may want to change the server_name as this is the name by which
other LAT hosts will refer to the Model 5390 server. After changing the appropriate LAT parameters,
the administrator must issue the na command reset annex lat to activate the new parameters.
For more details on using na commands, see na Commands starting on page C1-1.
For more details on using the CLI commands, see Using the CLI Commands starting on page C3-1.
A14-64 893-741-B