Filter Subcommands - Bay Networks 5390 Administering

Filter Subcommands

This section describes the subcommands in alphabetical order.
893-741-B
Table A13-2. Sample Commands using the filter_list Arguments
Argument Description
disable 1, Disables filters 1, 3, 4, 5, 6, 7, and 10. If any of these
3–7,10 numbers represents a deleted filter or a filter for an inactive
interface, an error message is displayed for that number; the
other filters in the range are disabled.
disable –5 Disables filters 1, 2, 3, 4, and 5.
disable 3– Disables all filters from filter 3 through the end of the list of
all filters.
enable – Enables all filters.
enable * Enables all filters.
enable all Enables all filters.
enable 5– Enables all filters from filter 5 through the end of the list of
all filters.
Filtering
A13-7