Table B-3. Field Definitions For The Netstat -Ip Command - Nortel 2000 User Manual

Book B
Table B-3. Field Definitions for the netstat –ip Command
Field Definition
local Refers to the Annex.
remote Refers to the peer.
[xxx] The origin of the value for ip–addresses:
ANX=param; REM=peer–defined; and ACP=from
security server ACP dial–up addresses.
LCP and Shows the current and the prior state of the connection.
NCP (IPCP) Any current setting other than Open indicates the link is
Options not up. The states are:
Closed The layer has shut down via an administrative or peer
request.
Request sent The Annex has sent a configure request and is waiting for
an answer.
ACK received The Annex has received a configure ACK and is waiting
for a configure request.
ACK sent The Annex received and answered a configure request.
Open Layer negotiation has completed successfully.
Closing The link is in process of closing. The Annex has sent a
terminate request and is waiting for a terminate ACK.
Security Shows the states based on the last security messages sent
and received; this field appears only in superuser mode.
(continued on next page)
Remote Annex Administrator's Guide for UNIX
Chapter 1 Network Administration
Book B-7