Table B-5. Field Definitions For The Netstat -G Command - Nortel 2000 User Manual

Chapter 1 Network Administration
Remote Annex Administrator's Guide for UNIX
Book B-12
Table B-5. Field Definitions for the netstat –g Command
Field Definition
Intf Displays the interface.
Bad Pkts Displays the number of packets the interface dropped due to
invalid format or data.
Bad Rtes Displays the number of routes the interface dropped due to
invalid format or data.
Trigg. Displays the number of triggered updates transmitted over
the interface. The Annex sends triggered updates whenever it
changes the hop count of a route. It transmits them
immediately, even if it is not yet time for one of the regular
update messages to be transmitted.
Rec'd Displays the number of packets (with or without errors)
received over the interface.
Sent Displays the number of output packets the Annex tried to
send over the interface. This number includes packets that
were dropped because the Annex ran out of buffers or the
link's output queue was full.
Disc'd Displays the number of input packets discarded due to
protocol errors or restrictions set by configuration
parameters (e.g., rip_accept).
Update Displays the number on lines in the routing table that were
modified due to packets received on that interface.
Queries Displays the number of routing-table queries received on the
interface.
Book B