GE AutoSigma 3000 DL Technical Reference, Operating Manual page 24

Preparation for operation
The instrument will revert to the default parameter val-
ues as below.
• Backlight
• High Alarm
• Low Alarm
• Temperature Units
• Recall
• Frequency
• Probes, 3 each
• Store
• Units
• Contrast
• STD 1
• STD 2
• Audio Alarm
• Power Down
• Language
• Baud Rate
• D1, D2, D3, D4
3 - 8
Off
Off
Off
Celsius
1
60 kHz
5555 / 55
1
% IACS
7
60.50
8.870
Off
15 minutes
English (GB)
1200
5, 5, 5, 5
Issue 04, 06/2007
The following list shows the settings available for each
parameter.
Parameter Available States
Backlight On/Off
High Alarm 1.0 – 110 % IACS / Off
Low Alarm Off / 1.0 – 110 % IACS
Temperature Units Celsius / Fahrenheit
Recall 1 – 10
Frequency 60 / 500 kHz
Probe Codes 3 large and 3 small
Store 1 – 10
Units % IACS or MS/m
Contrast 3 – 10
STD 1 30 – 65 % IACS
STD 2 6 – 50 % IACS.
Audio Alarm On/Off
Power Down 15 / 10 / 5 / 1 minutes
Language English (GB) /German (D) /
French (F) etc.
Baud Rate 9600 / 4800 / 2400 / 1200
Start-up
AutoSigma 3000