Table of Contents
Advertisement
6.1 Introduction - maintenance
WARNING:
before you do maintenance on the product.
WARNING:
For better operation and lifetime of the product, make
sure to clean the product regularly and replace worn
parts.
When the product is new, examine the blade discs and
blades each week. If the wear is low, you can increase
the interval for the next time you examine the blade
discs and blades. Examine the blade discs and the
blades more regularly if there is much wear.
6.2 Maintenance schedule
The maintenance schedule shows how to do
servicing and maintenance on the product. Follow the
maintenance schedule for a better operation and to
increase the lifetime of the product.
To prepare
Clean the product. Refer to
Examine the product for damage and wear.
Do an update of the firmware.
Do a check of the servicing messages for recommended upgrades.
Servicing
Examine the blades and replace the blades and blade screws if it is necessary.
Replacement of the blades on page 30 .
Refer to
Examine and polish the contact plates on the charging station.
Examine and polish the charging plates on the product.
Charge the battery fully before you put the product into storage. Refer to
charge the battery on page 26 .
Make sure that the product is docking and charging correctly.
Examine and clean the airflow filter.
Replace the airflow filter.
Do a check of the tightening torque of chassis screws.
Open the chassis and replace all sealing strips.
28 - Maintenance
6 Maintenance
Set the product to OFF
Use protective gloves.
Clean the product on page 29 .
It is important that the blade disc rotates easily and that
the edges of the blades are not damaged. The usual
lifetime of the blades are 4 to 7 weeks. The conditions
that follow can increase or decrease the lifetime of the
blades:
•
Operation time and dimension of the work area.
•
Length and thickness of the grass.
•
Soil, sand and use of fertilizers.
•
Objects such as cones, tools, stones and roots in
the work area.
Note:
The cut result can be unsatisfactory if the
blades are blunt. Refer to
on page 30 on how to replace the blades.
X = The instructions are given in this operator's manual.
O = The instructions are not given in this operator's
manual. Speak to your approved servicing dealer.
Weekly
To
Replacement of the blades
Every
Every
year
third year
X
X
X
O
X
X
X
X
O
O
O
1886 - 001 - 01.02.2023
O
O
Advertisement
Table of Contents
