Kärcher VC 2 Original Operating Instructions page 10

Replacing the filter bag
Illustration
 Replace the filter bag if the filter change indicator is
on.
Illustration
 Unlock and open the filter cover.
Illustration
 Fold out the filter bracket and remove the filter bag.
Illustration
 Close and dispose of the filter bag.
Illustration
 Push the new filter bag into the support until the
stop.
 Snap in the cover.
Change the motor protection filter
Motor protection filter: change before the last filter
bag is removed from the filter bag package.
The motor protection filter is behind the inserted filter
bag.
 Change the motor protection filter prior to inserting
the filter bag.
Illustration
 Remove the filter frame.
 Remove the old motor protection filter from the filter
frame and dispose of.
 Insert new motor protection filter into the filter
frame.
 Insert filter frame.
Filter for pure blower air.
Note
 Clean the HEPA filter in case of visible soiling.
 Replace the HEPA filter in case of damage
ATTENTION
Material damage due to incorrect cleaning of the HEPA
filter.
–
Do not rinse out the HEPA filter!
–
Never clean the filter in the washing machine and
do not dry it by means of a hair dryer.
Illustration
 Open the cover.
 Unlock the HEPA filter and remove.
Illustration
 Carefully empty/knock dirt out of the HEPA filter.
Illustration
 Insert the HEPA filter and snap it into place.
 Insert cover and snap it into place.
Cleaning the floor nozzle
Clean the switchable floor nozzle at reglular intervals!
 Remove the floor nozzle from the telescopic suc-
tion pipe.
 Clean floor nozzle.
Cleaning the accessories
Illustration
 Handle and suction tube can be disconnected in or-
der to clean or if clogged. Push the 2 interlocks and
pull apart.
 Connect handle and suction tube and insert.
10
HEPA filter
Technical specifications
Kärcher
Voltage
Current type
Protective class
Weight (without accesso-
ries)
Action radius
Actual dust bag volume
Dimensions
Length
Width
Height
Vacuum min.
HEPA filter
Eco design as per 666/2013:
Sound power level L
Rated power input
Subject to technical modifications!
– 7
EN
V 220-240 220-240
Hz 50/60
II
kg 5.1
m 7,5
l 2,8
mm 435
mm 288
mm 250
kPa 16
HEPA 12 HEPA 13
dB(A) 76
WA
W 700
50/60
II
5.1
7,5
2,8
435
288
250
16
76
700