Table of Contents
Advertisement
14 | Installation
1
Fig. 9
Coating the hub sealing faces
1
Packing groove
2
Upper hub sealing face
3
Lower hub sealing face
B Clean nipple with a rag soaked in white spirit and coat
evenly with sealant.
B Insert nipple directly into the upper (size 4, 181/70)
and lower (size 2, 119/50) hub on the rear section.
B Hammer nipple home with alternate heavy blows.
The upper nipple must protrude
approx. 43 mm and the lower nipple
approx. 32 mm out of the corresponding
hubs.
B Remove any burrs with a file.
The packing grooves must be clean and dry
to enable the packing cord to adhere
properly.
6 720 803 940 (2010/03)
2
3
6 720 648 663-08.1T
Fig. 10 Driving nipples home
CAUTION: Risk to health from vapours
released and also skin contact during the
processing of materials, such as adhesives,
adhesive bases or sealants.
B Observe processing and safety
instructions on the material packaging.
B Ensure good ventilation in the installation
area.
B Wear work gloves to avoid contact with
skin.
B The product and its container must be
treated as hazardous waste for disposal
purposes.
B Coat the packing grooves with adhesive (adhesive
base)
Fig. 11 Coat the packing grooves with adhesive
1
Packing grooves
1
6 720 648 663-09.1T
UNI 7000 F
Advertisement
Table of Contents
