Regulations; Installation Location; Quality Of Heating Water; Disposal And Recycling - Bosch UNI 7000 F Installation And Servicing Instruction

10 | Regulations

3 Regulations
Observe all standards and directives
applicable to the installation and operation
of this heating system in the country in
which it is used.
The information on the type plate is binding
and must be observed.
3.1

Installation location

NOTICE: System damage due to frost!
B Site the heating system in a room safe
from the risk of frost.
3.2

Quality of heating water

B The operator's log enclosed with the specifications
MUST be observed when using and treating fill and
top-up water.
B Record the filling water quantity and composition in
the operator's log.
3.3

Disposal and recycling

B If any heating system components need to be
replaced, they should be disposed of in an
environmentally responsible manner, via an approved
disposal site.
B Dispose of packaging in an environmentally
responsible manner.
6 720 803 940 (2010/03)
4

Installation

4.1 Checking the delivery for
completeness
The boiler can be delivered either as a pre-assembled
block or in loose sections.
B After delivery, check all packaging is in perfect
condition.
B Check all components have been delivered.
4.1.1

Delivery as a pre-assembled block

Component
Boiler block
Furniture
Fixing elements
Casing Pack A
Casing Pack B
Thermal insulation
Tab. 6 Scope of supply (block delivery)
4.1.2

Delivery in loose sections

Component
Front, rear, central sections
with upper flow connection
and burner door
Central sections
(depending on boiler size)
Base unit fittings,
9 – 16 sections
Supplementary fittings
(contents depend
on the size of the boiler)
Fixing elements
Casing Pack A
Casing Pack B
Thermal insulation
Set of anchor rods
with spring packages
Tab. 7 Scope of supply (loose sections)
Pce Packaging
1 Pallet
1 Case
1 Case
1 Case
1 Case
1 Foil bag
Pce Packaging
1 Pallet
2 – 5 Pallet
1 Case
1 Case
1 Case
1 Case
1 Case
1 Foil bag
UNI 7000 F