Table of Contents
Advertisement
2
Product information
2.1
Product overview
This boiler is a low temperature boiler that complies
with BS EN 303 for oil or gas combustion with
modulating boiler water temperature control and no
minimum return temperature.
The main components of the Uni 7000 F forced draught
are:
• The boiler block transfers the heat generated by the
burner to the heating water.
• The boiler shell and lagging prevent energy loss.
• The control unit serves to monitor and control all
electrical boiler components.
1
2
3
4
Fig. 1
Uni 7000 F fan-assisted boiler
1
Control unit
2
boiler block
3
Thermal insulation
4
Boiler shell (casing)
2.2
Correct use
The Uni 7000 F forced draught boiler is intended for
generating heating water. You may use any type-tested
oil or gas fired burners to EN 267 or EN 676 provided
their operating range meets the boiler specification.
Any other use is deemed to be inappropriate. Any
resulting damage is excluded from the manufacturer's
warranty.
UNI 7000 F
2.3
This product conforms in design and operation to the
European Directives and the supplementary national
requirements. Its conformity is confirmed by the CE
designation.
You can call up the Declaration of Conformity for this
product on the internet or request a copy from your local
Bosch sales office.
4
6 720 648 663-04.1T
Product information | 5
EU Declaration of Conformity
6 720 803 940 (2010/03)
Advertisement
Table of Contents
