Bosch UNI 7000 F Installation And Servicing Instruction page 30

30 | Installation
1
3
Fig. 42 Fitting the rectangular lagging and burner cable
1 Tension springs
2 Burner cable
3 Thermal insulation
B Depending on which side the door closes, screw the
burner cable strain relief to the left or right hand side
of the lower cross bar (
burner door closure).
B Push front plinth panel from the front into the lower
lengthways bars and screw to lengthways bars.
B Fit the rear plinth panel in the same way.
1
2
Fig. 43 Fitting the burner cable strain relief and plinth
panels
1 Lower cross bar
2 Front plinth panel
3 Burner cable strain relief
Please see Fig. 46, page 31 for the
arrangement of the side sections and hoods.
6 720 803 940 (2010/03)
2
6 720 648 663-32.1T
Fig. 43 – for right-hand
3
6 720 648 663-33.1T
B Push the lower folded edge of the first side panel
section behind the lower lengthways bar, lift slightly
and hook the top of the section into the slots on the
upper lengthways bar.
1
Fig. 44 Fitting the side panel section
1 First side panel section
2 Upper lengthways bar
3 Lower lengthways bar
B Push the lower folded edge of the remaining side
panel sections behind the lower lengthways bar, lift
slightly and hook the upper folded edge over the
upper lengthways bar.
Fig. 45 Fitting the remaining side panel sections
1 Upper lengthways bar
2 Lower lengthways bar
2
3
6 720 648 663-34.1T
1
2
6 720 648 663-35.1T
UNI 7000 F