Enabling The Screen Lock Automatically; Setting The Call Alert Mode And Phone Volume - Nortel MCC3100 User Manual

For more information, see

Enabling the screen lock automatically

Use the following procedure to use the automatic screen lock.
1. Select Tools > Settings. The MCC 3100 for Windows Mobile
Configuration screen appears.
2. Tap the Advance tab.
3. Select On Calls for the Lock Screen field.
4. Click Apply.
5. Tap OK.
The screen lock turns on automatically whenever you engage in an
incoming or an outgoing call. To turn the screen lock off, tap and hold the
Lock button for approximately half a second.
Setting the call alert mode and phone
volume
You must run the MCC 3100 for Windows Mobile in the
foreground in order to adjust the volume control
settings.
Use the MCC 3100 for Windows Mobile built-in volume controls for the
following settings:
• To select the call alert mode (ring, vibrate, or off).
• To set the phone ringer volume.
• To set the phone speaker volume.
Appendix A "Manual setup" on page
IMPORTANT!
Basic setup and use
97.
41