One Time Backup Tab - Nortel INM 5.0 Update Manual

1-14 Network Wide Backup & Restore Description
"Save as Defaults" action button saves the current information in the data fields
as the UI defaults for recurring backups. This is stored, and can be read in by
the "Set To Defaults" action button. It is important to realize that this
information should be generic enough to span the entire controller list, not just
selected controllers.

One Time Backup Tab

Figure 1-8
One Time Backup tab
The one time backup tab allows for a backup to take place on a controller
which occurs only once. A one time backup might be performed before some
upgrades, testing etc.
Setting up a One Time Backup
To set up a one time backup time for a particular controller, select the
controller and the One-Time Backup tab. Then set the required fields. The
following table lays out the field type, description, and valid input.
Table 1-5
Setting up a One Time Backup information
Field Description
Start Date
YYYY Four digit calendar year.
MM Two digit calendar month. XX-- where XX denotes an integer between 01 - 12 inclusive.
Integrated Network Management
Valid Input
XXXX where XXXX denotes an integer form of year.
—continued—
Rel 1.0 Standard July 1999