Page 2
8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2023 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
Page 3
CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.
Redundant dual power inputs IP30 rugged metal housing Fanless design Supports wide temperature range -20°C~70°C (IMC-1001C-E & IMC- 1001CS-E) Operates in Store and Forward switch mode or Pass Through converter mode (Set by DIP switch)
Panels Figure 3. Top Panel Figure 1. Front Panel Figure 2. Front Panel of IMC-1001C(-E) of IMC-1001CS(-E) Description Power terminal block Earth ground connector LED indicators LAN interface Function DIP switch Optical fiber interface (Fixed fiber or SFP slot) Earth ground sign...
Fiber & LAN Connection Both Fiber and LAN interface are located on the front panel. The fiber interface of IMC-1001C(-E) supports 1000Mbps and has fixed optical transceiver option for SC or ST connector type; whereas, the fiber interface of IMC-1001CS(-E) utilizes a SFP slot that supports 100/1000Mbps.
Pass Thru Mode To activate Pass Through mode, set DIP pole 1 to ON position. The Pass Through mode allows the media converter to pass through traffic unmodified from one end device to the other over fiber. If your application topology is similar to one of the following two diagrams, it is recommended using “Pass Thru”...
Recommended Power & Ground Wiring Scheme Power Connection IMC-1001C(-E) & IMC-1001CS(-E) media converters are powered up by an external power supply. On the top panel, a removable 4-pin terminal block is provided for two pairs (PWR1 & PWR2) of DC power connection.
LED Indicators Color Status Description Lit if power is connected and active. Green Power is not connected. The connected LAN speed is 1000M. Blinking when there is Ethernet Blinking Amber traffic. The LAN link is down or LAN speed is 10/100M.
Installation IMC-1001C(-E) & IMC-1001CS(-E) can be installed in DIN rail or mounted on wall (optional). Hardware brackets for DIN rail installation are provided with the device. However, wall-mounting brackets are not provided. If you need wall-mounting installation kit, please contact your sales representative.
Page 14
Version Date Description 2022/8/5 Preliminary version 2023/1/6 -Add descriptions of Pass Thru & Switch mode in page 10 -Revise product photo & bw line graph.