CTC Union FMC-1001S Quick Installation Manual

CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
© 2017 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
FMC-1001S provides a cost-effective solution for Fast and
Gigabit Ethernet fiber media conversion. By utilizing industry
standard SFP modules, this converter can be utilized with multi-
mode or single mode fibers with LC connectors as well as single
fiber (WDM) transceivers. The f i b e r port provides 100/1000M
connection, while the copper UTP port provides 10/100/1000M
auto-negotiation to connect to a wide variety of Ethernet devices.
FMC-1001S gives you the freedom to extend your
10/100/1000M cabling distance by allowing connectivity up to
120KM over fiber. LED indicators signal the power status, UTP link
& speed and fiber link & speed.
Features
 10/100/1000Base-T to 100/1000Base-X SFP Converter
 Auto-Negotiation
 Auto MDI/MDIX
 Forward 2048K bytes (Max.) packets (Switch mode)
 Support 9K bytes packets (Converter mode)
 Supports Link Fault Pass Through (LFP)
 Supports IEEE 802.1Q Tag VLAN pass thru
 Supports Q in Q double tagged frame transparent
 Provides DIP switch to set functions
Specifications
Electrical Interface
 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab
(1000Base-T)
 Speed: 10/100/1000Mbps
 Connector Type: 1 x RJ-45 connector
 Duplex Mode: Full duplex
 Cable Type: Cat. 5, 5e or higher
www.ctcu.com
- 1 -
Quick Installation Guide
FMC-1001S
FMC-1001S-AC
FMC-1001S-DC
10/100/1000Base-T to 100/1000Base-X Fiber Media Converters
sales@ctcu.com
Specifications (Cont.)
Optical Interface
 Standards: IEEE802.3u (100Base-FX), 802.3z (1000Base-SX/LX)
 Connector Type: SFP LC
 Data Rate: 100/1000Mbps
 Duplex Mode: Full duplex
 Fiber: 50/125um (MM), 62.5/125um (MM); 9/125um (SM)
 Distance: 2KM (MM), 15/30KM (SM), 20/40KM (WDM)
 Wavelength: 1310nm (MM), 1310/1550nm (SM)
1310nm TX/1550nm RX Type A (WDM)
1550nm TX/1310nm RX Type B (WDM)
Power
 Adapter Type: Adapter Output 12VDC 0.5A
 Built-in AC Power: Input 100~240VAC
 Built-in DC Power: Input 18~60VDC
 Consumption: < 3W (SFP not included)
Mechanical
 Dimensions: 73.4mm × 108mm × 23mm (Adapter type);
73.4mm × 135mm × 23mm (Power built-in type)
 Mounting: Wall mounting (For wall mounting models only)
 Weight: 120g (Adapter type); 140g (Power built-in type)
Environment
 Operating Temperature: 0°C~50°C
 Storage Temperature: -10°C~70°C
 Humidity: 10%~90% (Non-condensing)
MTBF (MIL-HDBK-217)
 65,000 Hours
Certifications
 EMC: FCC Class A, CE
V1.0
- 2 -