CTC Union IMC-100-PH12 Quick Installation Manual

Installation
The converter comes with both wall mount and DIN rail
hardware brackets. When installing the DIN rail bracket, be sure
to correctly align the orientation pin.
Figure 7. DIN Rail
The converter with DIN Rail bracket has a steel spring in the
upper rail of the bracket. This spring is compressed for mounting
and un-mounting by applying downward force.
Figure 9. Mounting
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60 Zhouzi St., Neihu District, Taipei 114
Taiwan
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2014 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
IMC-100-PH(E)12 are Fast Ethernet PoE (Power over Ethernet)
media converters that support conversion between electrical
10/100Base-TX and optical 100Base-FX Ethernet. Housed in
rugged DIN rail or wall mountable enclosures, these converters
are designed for harsh environments, such as industrial
networking and intelligent transportation systems (ITS) and are
also suitable for many military and utility market applications
where environmental conditions exceed commercial product
specifications.
Features
 12/24/48VDC (9.6~57VDC) redundant dual input power and
built-in very high efficient power booster
 Constant and regulated PoE output voltage at 55VDC
 IP30 rugged metal housing
 Wide temperature range -20°C~75°C (IMC-100-PHE12)
 Power loss and port link loss alarm indication
 Remote PD device reset feature
 Industrial grade EMS, EMI, EN50121-4, EN61000-6-2,
EN61000-6-4
Specifications
Optical Interface
 Standards: IEEE 802.3u
 Speed: 100M
 Connector: SC or ST
 Multimode (2km) 50/125um, 62.5/125um
 Single mode (30km or 50km) 9/125um
 Wavelength: 1310nm (S/M or M/M)
Ethernet Interface
 Standards: IEEE 802.3, 802.3u
 Connector: RJ-45 (shielded)
 Auto MDI/MDI-X
 Speed: 10/100Base-TX (Auto)
 Duplex: Full/Half (Auto)
 MTU: 9600K
 Link Fault Pass Through (LFP)
Power over Ethernet
 1 PoE Enabled port
 Supports IEEE 802.3af 15.4W PoE & IEEE 802.3at 30W PoE+
 Positive (VCC+) pins 1, 2; Negative (VCC-) pins 3, 6
 Data: pins 1, 2, 3, 6
www.ctcu.com
Figure 8. Wall Mount
Figure 10.Un-mounting
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
- 7 -
- 1 -
Quick Installation Guide
IMC-100-PH12
IMC-100-PHE12
Industrial Grade Fast Ethernet PoE+ Fiber Converters
sales@ctcu.com
Specifications (cont.)
Power
 Absolute Range: 9.6~57VDC
 Reverse Polarity Protection: Yes
 Dual Power Inputs: Yes
 Connector: Removable terminal block
 Consumption:
Items Total Power
Input Voltage Consumption
12VDC 34W
24VDC 34.4W
48VDC 34.9W
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions: 106 mm (D) x 62.5 mm (W) x 135 mm (H)
 Mounting: DIN-Rail, Wall Mount (Kits included)
 Weight: 655 g
Environmental
 Operating Temperature: -10°C~60°C － IMC-100-PH12
-20°C~75°C － IMC-100-PHE12
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 EMC: CE
 EMI (Electromagnetic Interference): FCC, FCC Part 15 Subpart
B Class A, CE EN55022 Class A
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength:
300A/m, Criteria A
 Safety: UL60950-1 (Pending)
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6
 MTBF (MIL-HDBK-217): 419,822 hours
Device Power PoE Boost
Consumption Budget Efficiency
3.5W 30W 98.4%
4.1W 30W 99.0%
4.3W 30W 98.0%
V1.0
- 2 -