Using Quick2Config And Annex Manager; Configuring Using Quick2Config Annex And Annex Manager; Installing And Configuring The Remote Annex Software - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Using Quick2Config and Annex Manager
This Appendix describes how to use Quick2Config
Manager
regarding your specific device, please refer to the documentation for the specific
model you are configuring.) The descriptions that follow supplement the
command line interface instructions in
Annex."
Configuring Using Quick2Config Annex and Annex Manager
If you use Microsoft
for details on configuring a Remote Annex.
If you use UNIX, refer to the Annex Manager User's Guide for details about
managing a Remote Annex.
Installing and Configuring the Remote Annex Software
This section is an overview of the installation and configuration process,
highlighting areas of particular concern.
Note: To facilitate troubleshooting, test each element of your system after you
configure it and before proceeding to the next phase of the configuration.
1.
115623B Rev. 00
™
to install, configure, and start a Remote Annex device. (For details
®
Windows
Install the Remote Annex software.
This is a standard installation using the installation script supplied for Dial
VPN, as described in the documentation for the particular Remote Annex or
Remote Access Concentrator device you are installing.
BayStream Multiservice Software Version 7.2
™
Chapter 4, "Configuring the Remote
®
, refer to the Quick2Config Annex online help
Appendix C
Annex and Annex
C-1