Command Arguments - Bay Networks Baystream 7 Configuration And Troubleshooting Manual

Table 5-1.
Command
remove
show
All commands except

Command Arguments

The tunnel management commands use common arguments to specify what the
command is to act upon.
can appear with the
Note: In addition to the parameters shown in
also displays accounting parameters, which are irrelevant to Dial VPN.
115623B Rev. 00
Tunnel Management Commands
Description
Removes from the database the IP address of a RAS that is no longer
in use. Decrements the total active user count for each domain/DNIS
pair for which there is an active user count for the specified RAS. Use
this command if you remove a RAS from service.
Displays the specified database information; returns an error if no
matching entry exists.
and
add help
Table 5-2
command.
help
BayStream Multiservice Software Version 7.2
Configuring TMS for an erpcd-based Network
(continued)
return an error if the entry is not found.
describes each of the arguments. Any argument
Table 5-2, the command
show
5-5