Lists Async Port, Basic Async Port - Bay Networks Manager User Manual

Part 5 Reference Information
load_dump_sequence
local_address
location
lock_enable
specifies available network interfaces and the order in which they are used for a
down-line load or an up-line dump. You can list more than one interface by using
commas to separate interface names. You can enter:
• to specify a local area network.
net
•
sl + port number
and a port number, you must enter an address in the
slip_load_dump_host
• to instruct an Annex to boot its image from the Flash
self
ROMs. Since the Annex cannot dump back to itself, you should
include a secondary interface here by entering
self,sl+port number.
Type Annex
Value net, sl+ port number, self
Default net
Lists Annex Only, Basic Annex
defines the IP address for the port on the Annex side of the link. This IP address
is used only when
mode
Type Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, PPP, SLIP
defines a port location or description that displays at the CLI
Type
Async
Values
0 to 16 characters
Default
" " (null string)
Lists
Async Port, Basic Async Port
allows any port to use the LOCK DECServer command.
Type
Annex
Values
enabled or disabled
Default
disabled
Lists
Annex Only, Security
(e.g., ) to specify a SLIP line. If you enter
sl2
parameter.
is set to , or
slip ppp, autodetect
Annex Manager User Guide
Chapter 22 Annex Parameters
sl
or
self, net
.
command.
who
22-57