Introduction
Annex Manager User Guide
xxx
–
Use predefined configuration script files to configure
Annexes and ports.
•
Compare parameters and values for two Annexes, for an Annex
and a script, or for two scripts.
•
Copy the current parameter settings from one port to another or
from one Annex to another.
•
Retrieve basic status and statistics information from an Annex
or from a specific port on more than one Annex.
•
Define site specific defaults.
•
Identify Annexes in the network.
•
Save lists of Annex names or addresses.
•
Display default values for each configuration parameter.
•
Boot and reset Annexes.
•
Edit Annex configuration file.
•
Reset ports or Annex subsystems automatically after you
change parameter settings.
Supported Annex Hardware and Software
•
Annex Manager supports the following Annex hardware
platforms: RA2000, RA4000, RA6100, RA6300, Bay
Networks 5391, Bay Networks 5393, and Bay Networks Model
5399 Remote Access Concentrator Module.
•
Annex Manager supports Annex software versions 13.3 and
14.0.