Transportation Safety - Beko Hll74700UF User Manual

compliance with the electrical
regulations and separating all
poles trom the network.
• The product must not be
connected into the outlet
during installation, repair, and
transportation.
• Connect the product into an
outlet that meets the voltage
and frequency values
specified on the type label.
• (Not all products are
supplied with a supply card,
so if your product DOES
NOT have a supply card)
Use only the connecting
cable specified in the
"Technica! specifications"
section.
• Do not jam the power cord
under and behind the
product. Do not put a heavy
object on the power cord.
The power cord should not
be bent, crushed, and come
into contact with any heat
source.
• Use original cable only. Do
not use cut or damaged
cables or extension leads.
• lf the power cord is damaged,
it must be replaced by a
manufacturer, an authorized
service or a person to be
specified by the importer
6/EN
company in order to prevent
possible dangers.
(Not all products are supplied
with a plug, so if your
product DOES have a plug)
• Do not plug the product into
an outlet that is loose, has
come out of its socket, is
braken, dirty, oily, with risk of
water contact (for example,
water that may leak trom the
counter).
• Never touch the plug with
wet hands! To unplug, do not
hold the cord, always hold
the plug.
• Make sure that the product
plug is securely plugged into
the outlet to avoid arcing.
ÀTransportation safet y
• Disconnect the product trom
the mains before transporting
the product.
• When you need to transport
the product, wrap it with
bubble wrap packaging
material or thick cardboard
and tape it tightly. Secure the
product tightly with tape to
prevent the removable or
moving parts of the product
and the product trom
damage.