Beko Hll74700UF User Manual page 21

You may turn off the hob by reducing
the temperature setting to "O"
2.Using the timer off function for the
desired hob zone
When the time is off, the timer turns
off the hob connected to it. All
displays indicate "0" or "00" . The 0
symbol on the hob display disappears.
The setting of the timer for the hob
zone is described in the following
chapters.
Combination of the hob zones
with wide surface (flexi) (if hob
zones with wide surfaces are
available on your hob)
1.Turn the hob on by touching the CD
key.
r:1
2.Touch the key.
» The display of the left hob zone
displays O and - light of the
be illuminated.
3. By touching on the setting area or by
sliding your finger on the area, set the
temperature level between O and 9
While the temperature level is increased
as 1,2,3 ... 19 on some models, it may be
increased as 1, 1.,2,2 . ... 9. on some
other models. This varies as per product
model.
» The hob starts to operate. lf another
hob is selected or if you wait for 1 0
seconds without any operation, the -
r:1
light of the key will fade.
A The hobs with wide surface on
V the left are described as an
example. lf the hobs on the right
have wide surfaces on your
appliance, the same apply for the
hobs on the right.
Combination of the hobs with wide
surface (flexi) while one or both of
the hobs on the left are operating
(if hobs with wide surfaces are
available on your hob)
While one or both of the hobs on the left
are operating separately, you may
combine both hobs by activating the
hob with wide surface. In this way, you
may operate a wider hob surface with
the same values.
1.While one or both of the hob zones on
» On both of the hob zone displays, the
hob zone with the lower degree will be
displayed and - light of the
r:1
key will
illuminate.
» Combined hobs resume to operate
with the temperature of the hob zone
which have a lower degree and, if
applicable, with the timer setting value.
Temperature and timer values of the hob
zone that had a higher temperature
value before combining will be cancelled.
» To change the temperature value
afterwards, set the desired temperature
level from the setting area.
Turning the cooking zones with
wide surface off (if hobs with wide
surfaces are available on your hob)
You may separate and turn off the
cooking zones by touching the
High power setting (BOOSTER)
You may use the booster to heat with
maximum power. However, we do not
recommend cooking for a long period at
this position. High power setting may
the left are operating, touch the
CD
&i ii
r:1
key.
r:1
key will
&i ii
r:1
key
21/EN