Nortel 1000 Quick Start Manual page 10

Configuration Steps
Broadcast Server
Install Broadcast Server software,
1.
configure Microsoft IIS, and configure the
connection between the Application
Gateway and Broadcast Server.
Synchronize the clocks on the Application
2.
Gateway and Broadcast Server.
Configure Broadcast Server.
3.
Zone Paging
As needed, create custom zones.
1.
If you configured clustering, verify setup
2.
for paging.
Visual Voicemail
Enable Nortel Messaging features such as
1.
Desktop and Web Messaging.
Configure Visual Voicemail.
2.
Smart Agent
Review the general deployment steps.
1.
Configure the connection from the
2.
Application Gateway to the Smart Agent
client and LDAP server. Specify the
country and area code of the Application
Gateway, as well as the dialing prefixes.
Guest Services
Refer to chapter 2 of the Guest Services Configuration Guide.
8
Application Gateway Quick Start Guide
Topic heading in the Application Gateway
Administration Guide
"Installling Broadcast Server Software"
"Synchronizing the Application Gateway and
Broadcast Server Clocks"
(See "Configuring Broadcast Server" in the
Broadcast Server User Guide.)
"Adding and Changing Custom Zones"
"Paging Setup and Operation with Clusters"
"Configuring Nortel Messaging"
"Configuring Visual Voicemail"
"Smart Agent Operation and Deployement"
"Configuring Smart Agent"