Table of Contents
Advertisement
SPECIFICATIONS
Backpanel Connectors
Label
CELL, AUX
AP1, AP2
USB DEVICE
E-NET
USB HOST
Power
GPS
WIFI
10
Description
Cellular antenna inputs.
CELL - Primary.
AUX - Diversity.
Slots for MultiTech accessory cards. You can install an accessory card in either slot. Both slots
can be occupied at one time. An exception is an SDIO (Secure Digital Input/Output) card,
which can be used only in the AP1 slot. Your device may ship with one or more accessory
cards pre-installed.
User-defined, high-speed 480 Mbps, standard USB 2.0 Micro B connector. Use this port to
connect the Conduit to a computer or another device. By default, this port is a serial port
terminal interface, but you can program it to act as another device such as a mass storage
device or an Ethernet port.
RJ-45 receptacle for standard Ethernet 10/100 Base-T.
Caution: Ethernet ports and command ports are not designed to be connected to a public
telecommunication network or used outside the building or campus.
High-speed, standard USB 2.0 Type A connector. 500mA maximum current draw. You can
plug into the Host port a device such as a flash drive, camera, or printer if the Linux kernel
has the appropriate driver.
9-32 Vdc power receptacle for provided power cord.
GPS antenna input. (Availability based on model.)
Wi-Fi antenna input for 2.4/5.0 GHz antenna. (Availability based on model.)
®
Conduit
Cat 4 for North America MTCDT-L4N1 Hardware Guide
Advertisement
Table of Contents
