2 - 34 MC55 User Guide
Linear bar code
Imager Aiming Pattern: Bar Code Centered
Figure 2-25
Correct
Imager Aiming Pattern: Bar Code Not Centered
Figure 2-26
Pick List Mode with Multiple Bar Codes in Aiming Pattern
Figure 2-27
Release the scan button.
4.
NOTE Imager decoding usually occurs instantaneously. The MC55 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
Digital Camera Scanning
Ensure that a scan-enabled application is loaded on the MC55.
1.
Aim the camera lens on the back of the MC55 at a bar code.
2.
Press and hold the scan button. A preview window appears on the display window with a red aiming reticle in
3.
the center. The Scan/Decode LED lights red to indicate that scanning is in process.
PDF417 symbol
Symbol
View Finder
(Aiming Pattern)
Correct
Incorrect