Technical Data; Noise Information - KRESS KUC12 Manual

TECHNICAL DATA

Type Designation KUC12 (C12-designation of
machinery, representative of drill)
Rated voltage
Rated no load speed
Torsion adjusting positions
Max torque
Maximum clamping capability
Steel
Max. drilling
Wood
capacity
Brick wall
Machine Weight
Battery capacity
** Voltage measured without workload. Initial battery
voltage reaches maximum of 12 volts. Nominal
voltage is 10.8 volts.
8

NOISE INFORMATION

EN
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection.
WEAR EAR PROTECTION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into metal
Impact drilling into
concrete
KUC12
12V Max**
0-500/ 0-1800/min
20+1+1
40Nm
10mm
10mm
20mm
8mm
0.95kg
2.0Ah
L = 78,6 dB(A)
pA
L = 92,6 dB(A)
wA
5 dB(A)
Vibration emission value
a = 1,916 m/s²
h,D
Uncertainty K = 1.5 m/s²
Vibration emission value
a = 8,942 m/s²
h,ID
Uncertainty K = 1.5 m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING:The vibration and noise emissions
during actual use of the power tool can differ from
the declared value depending on the ways in which
the tool is used especially what kind of workpiece is
processed dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
2.0Ah lithium battery pack(KPB1202)
1.5A charger (KCH1202)
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
KUC12
2
1