Advertisement
Available languages
Available languages
working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h)
Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5)
Service
a)
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
DRILL SAFETY WARNINGS
1)
Safety instructions for all operations
a)
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring or its own cord.
Cutting accessory or fasteners contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
2)
Safety instructions when using long drill
bits
a)
Never operate at higher speed than the
maximum speed rating of the drill bit. At
6
higher speeds, the bit is likely to bend if allowed
to rotate freely without contacting the workpiece,
EN
resulting in personal injury.
b)
Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if allowed
to rotate freely without contacting the workpiece,
resulting in personal injury.
c)
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of control,
resulting in personal injury.
SYMBOL
To reduce the risk of injury, user must
read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
COMPONENT LIST
1.
KEY STORAGE TAB
2.
ON/OFF SWITCH
3.
LOCK ON BUTTON
FORWARD/REVERSE ROTATION CON-
4.
TROL
5.
KEYLESS CHUCK
Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Voltage
Power input
No load speed
Chuck capacity
Wood
Max.
drilling
Steel
capac-
ity
Aluminum
Machine weight
Protection class
ACCESSORIES
Drill bit
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
KU110K KU110K.1
220-240V~50/60Hz
500W
0~2800/min
10mm keyless chuck
20mm
10mm
10mm
1.2kg
/II
KU110K
KU110K.1
/
1
Advertisement
