Component List; Technical Data - KRESS KUC30 Safety And Operating Manual

COMPONENT LIST

1. CHUCK
2. TORQUE ADJUSTMENT RING
3.
MODE SWITCH REGULATING RING
4. TWO-SPEED GEAR CONTROL
5. FORWARD/REVERSE ROTATION CONTROL
6. SOFT GRIP HANDLE
7. BATTERY PACK *
8. BATTERY CAPACITY INDICATOR
9. BATTERY PACK RELEASE BUTTON *
10. LED LIGHT
11. ON/OFF SWITCH
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type Designation KUC30 KUC30.1 KUC30.91
(C30 - designation of machinery, representative
of drill)
Voltage
No load speed
Number of clutch
positions
Impact rate
Max torque
Chuck capacity
Steel
Wood
Max. drilling
capacity
Concrete
Brick
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
Lithium-Ion brushless impact drill
KUC30 KUC30.1 KUC30.9
KUC30 KUC30.1 KUC30.91
20V Max**
-1
0-500/0-2100 min
20+1+1
0-33600bpm
60Nm
13mm
13mm
35mm
10mm
13mm
1.66kg 1.42kg 1kg
ACCESSORIES
KUC30
Charger 1(KAC21)
Battery pack 2(KAB21)
Double
1
ended bits
Hook 1
Bit Clip 1
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Assembly and Operation
ACTION
BEFORE OPERATION
Checking the battery charge
condition
ASSEMBLY
CHUCK ADJUSTMENT
Warning: Always lock off
trigger switch and disconnect
tool from power source when
changing accessories. Always ensure
the bit is secure before starting the
tool. Damage to the Chuck or a loose
bit may cause possible personal
injury.
Removing the bits
Inserting the bits
OPERATION
Forward/reverse rotation control
Warning: Never change the
direction of rotation when
the chuck is rotating, wait until
it has stopped!
TWO-SPEED GEAR CONTROL
KUC30.1 KUC30.9
/
1(KAC20)
2(KAB20) /
1 1
1 1
1 1
FIGURE
See Fig. A
See Fig. B1
See Fig. B2
See Fig. C1,
C2, C3
See Fig. D
9