Advertisement
Installation procedure
Cleaning and degreasing
( ▼ 6 places )
【Back side】
【Surface side】
Masking tape
④
【Part A details】
Match the shape of the broken line to a certain gap.
Masking tape
Ａ
Ｃ
④
※ This manual shows the LH side. Do the same for the RH side.
Door Under Garnish RR LH
【Part B details】
Ｂ
Door Under Garnish RR LH
1. Cleaninng/Degreasing
(1) Clean, degreas, and dry the shaded area of
the Door Panel with a degreasing agent.
！ Caution
If rainwater is attached, wipe it dry with
a dry cloth.
Insufficient wiping and drying can cause
the product to come off.
2. Preparing to install the Door Under
Garnish RR
(1) Part of the double-sided tape liners on the
④ Door Under Garnish RR LH is peeled off
and fixed with masking tape. ( ▼ 6 places )
Caution
！
Do not peel off the double-sided tape
liner more than necessary.
Double-sided tape clings to the vehicle,
which hinders positioning.
3. Install the Door Under Garnish RR
(1) Open the
front
④ Door Under Garnish RR LH with
masking tape according to the
shape, referring to the figure on the left.
【Part C details】
【Cross section D-D】
⑤ Cross section gauge
Rear door
Door Under Garnish RR LH
④
-3-
door and temporarily fix the
rear door
Rear door
Front door
D
D
Door shaped R-end
Align the cross section gauge
with the rear door. Press the
Door Under Garnish to
determine the position.
Push
※ For work on the RH side,
turn the Cross section
gauge over and use it.
Advertisement
