Advertisement
Please be sure to properly connect the connector and terminal. This helps to avoid a poor
•
connection.
• When wiring the harness(wiring), clamp the wires together along with the wiring harness of
the vehicle. This protects the harness from becoming entangled or causing strange sounds.
When connecting or disconnecting parts or installing or removing the finisher, etc, be
careful not to let the harness be hooked or pulled from the back. This protects against
a cut wire or shorts.
Be careful not to forcefully pull the wiring harness of the vehicle. This helps prevent the
connector from being disconnected, and the wires from being cut or damaged.
BEFORE BEGINNING INSTALLATION
1. Apply parking brake firmly and shift the selector lever into N range.
2. Disconnect the battery negative cable.
MOUNTING THE CIGARETTE LIGHTER (REPLACING WITH ACCESSORY SOCKET)
1. Removing assocoated parts
Wrap the screwdriver with vinyl tape to avoid scratching the trim panels.
-
Advertisement
