Yardworks SN70112-1 Owner's Manual page 7

This product must be correctly assembled before use.
Guide bar (Fig. 1A)
Slide the lower section (C) into the upper section (B).
Line up the holes on each tube, and make sure the
cable
(A) is clear of the mounting holes.
Secure the two sections together with the supplied
screw and wing nut.
Motor housing (Fig. 1B)
Connect socket (B) to the plug on the motor housing
(7).
Secure the upper cover to the motor housing with the
supplied screws.
ASSEMBLY
Description (Fig. 1)
1. Battery
2. Safety lock off button
3. On / Off trigger switch
4. Handle
5. Auxiliary handle
6. Upper cover
7. Motor housing
8. Auger
9. Discharge chute
7
Model SN70112-1