Installation Checklists; Site Inspection Checklist; Site Preparation - Nortel Meridian Meridian 1 Overview Manual

You will need a user name and password to access the Partner Information Center. The DTR provides
details on the currently supported PEPs and information that did not make it into the NTPs.

Installation Checklists

Complete all of the following checklists before attempting to install the HMS 400 system.

Site Inspection Checklist

Before performing hardware installation ensure the following has been done during site inspection:
Check

Site Preparation

The following items should be made available before going on-site for installation:
Check
Nortel Hospitality Messaging Server 400
Installation Overview Guide
Description
Ensure that a "water fire-retardant" system is not present in the chosen
location. If this system is accidentally activated, it will severely damage
the server.
Ensure that there are no heat sources near the peripherals and
ventilation.
Ensure that the area is clean and clear of any debris.
Ensure that there is adequate space for all equipments.
Ensure that there is a desk, shelf or table for the monitor, keyboard,
mouse and modem (more space will be needed in a multi-server
environment).
Ensure that an external analog phone line is available for the modem.
Ensure there are enough power outlets for the server, monitor, and
modem (more power outlets will be needed for multi-server systems).
Ensure that the 10/100 BaseT Hub/Switch and Cat5 cables are
available for the servers (for multi-servers only).
Description
Completed Pre-installation checklist
Sufficient power points with AC rating of 110V/220V
UPS of at least 400VA with Power Management software
recommended
1 LAN point (Optional)
56Kb USB Modem – recommended NTUB30HA: Orderable from Nortel
only in NA. Customers outside of NA will have to source for their own
USB modems (Requirement for remote technical support)
April 2006
-10-