26 Site administration
Companion Diagnostic Software for PCI User Guide
When you are prompted, type:
N
and press
Enter
OR
If you no longer want to attempt to change the administration
data of an existing site, exit the CDS Administration Utility.
When you are prompted, type:
E
and press
Enter
5. The previous connection type is displayed. When you are
prompted for the new connection type, type:
L
and press
Enter
6. The previous serial port number is displayed. When you are
prompted for the new PC serial port, type the one-digit number
(1 or 2) that identifies the serial port on the PC connected to the
serial port on the RAD and press:
Enter
7. When you are prompted for the cell edge RSSI, type the cell
edge RSSI (default is -70 dBm). Press:
Enter
When the administration data has been successfully changed, CDS
confirms the site data and exits the CDS Administration Utility.
P0886303 Issue 01 Standard