Door Parts; Replacing The Glass; Replacing The Door Gasket; Replacing The Door Handle - Travis Industries Lopi 1750 Republic Owner's Manual

Door Parts

10
14
4
3
5
ID # Description
1 Glass Gasket
3 Glass Clip w Gasket– 3 Hole
5 RTV High Temp. 600° Silicone
9 Lopi Glass
11 Lopi Door Handle Asbly
13 Door Cam

Replacing the Glass

The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips.
Lay the glass gasket in the door frame (cut off excess gasket). Place the glass on the gasket. Secure
the glass clips to hold the glass in place (make sure the glass clip gaskets are in place).

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door and is secured with RTV high-temperature 600°
silicone. Before installing, remove any residual cement. Lay the gasket in place (start at the lower left
corner) and cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from
the stove. You may need to open and close the door repeatedly to get the gasket to seat fully.

Replacing the Door Handle

See the illustration above for a component list (see pg. 27 for details on adjusting the door).
© Travis Industries
Maintaining Your Appliance
1
9
Qty Part #
1 250-00173
2/1 250-00174
1 250-00172
1 250-00171
1 250-00598
100-01435
ID # Description
4 Door Gasket
8 Door Washer
10 Glass Clip w Gasket– 2 Hole
12 Lopi Door Handle (spring)
14 Screws (8) 8-32 x 1/2" Torx
29
12
11
8
13
Qty Part #
1 250-00170
1 250-00364
1 250-00175
1 250-00373
1 225-20039
4151218