External Kits - Hamworthy STRATTON MK3 Series Installation, Commissioning And Servicing Instructions

STRATTON MK3 - Installation, Use and Maintenance
12.1.5.2. Fixing
12.1.5.3. Wiring
12.1.5.4. Configuration cascade
12.1.5.5. Configuration Non- cascade
12.1.6. UIN 235791 modbus interface

12.2. External kits

140 / 154
1. Remove the two left hand side cables, 14-way ribbon cable and 2 core
cable
2. Remove the mounting screws from the control box and keep them
3. Fit the Ribbon cable into the OCI345, check the orientation
4. Remove the 2-way RAST5 connector from the OCI345
5. Secure the OCI345 to the control box using the two mounting screws
6. Strip the outer sheath of the 2-core cable
7. Strip the two inner conductors and crimp on ferrules
8. Secure the cables:
DB Brown
MB White
9. Plug the RAST5 connector back into the OCI345, note that the connector
is polarised and so the screw heads face towards the control box
For cascade operation, connect each LPB bus connection in daisy chain:
DB to DB, MB to MB, etc.
For an external module refer to the installation documentation provided with
the specific option kit.
cascade master
Cascade slave
Line No. Parameter
Line No. Parameter
Line No. Parameter
Settings
Settings
Settings
00U07428680-C