Hamworthy STRATTON MK3 Series Installation, Commissioning And Servicing Instructions page 119

Line
Programming
no.
889 Speed. regl. filtr. time const.
898 T° level switching
900 Switching of heating circuit 1
Heating circuit 2
1010 Operation heating circuit 2
1012 Ambient temperature comfort setpoint CC2
1014 Reduced ambient temperature setpoint CC2
1016 Ambient frost protection temperature setpoint CC2
1020 Maximum comfort setpoint CC2
1021 Heating curve slope 2
1026 Heating curve displacement CC2
1030 Heating curve translation CC2
1032 Summer/winter switching heating circuit 2
1040 Daily heating limit CC2
1041 Minimum start temperature limitation CC2
1042 Maximum start temperature limitation CC2
1050 Ambient temperature influence factor CC2
1060 Ambient temperature limitation CC2
1061 Terminal regulator heating limit CC2
1070 Ambient cons. over-value CC2 (accelerated heating)
1080 Quick reduction CC2
1090 Max. advance optimise switch-on time CC2
1091 Max. advance optimise switch-off time CC2
1100 Start of increase Reduced ambient temperature
setpoint Heating circuit 2
1101 End of increase reduced set point Heating circuit 2
1120 Overheating protection pump CC2
1130 Mixing valve setpoint over-value CC2
1132 Motor control mode heating circuit 2
1133 Servomotor differential heating circuit 2
1134 Servomotor operating time CC2
1135 P band (Xp) Heating circuit 2
1136 Integration time (Tn) heating circuit 2
1150 Screed drying function CC2
1151 Manual setpoint for drying concrete screeds CC2
1161 Over-temperature reduction CC 2
1170 Heating circuit 2 with buffer tank
1172 Heating circuit 2 with Pre-regulator/Supply pump
1181 Wert 5937
1182 Min. speed of the CC2 pump
1183 Max. speed of the CC2 pump
1200 Operating mode switchin CC2
06.02.2023
STRATTON MK3 - Installation, Use and Maintenance
Access Default value
S 5 min
S reduced
S protection mode
U 20 °C
U 18 °C
U 10 °C
S 35 °C
U 1.5
S 0 °C
S Stop
U 19 °C
S -3 °C
M 8 °C
M 80 °C
U 65 °C
S 20%
S 1 °C
16%
S
S 3 °C
S stop
S 00:00
S 00:00
S -5 °C
S -15 °C
S on
S 3 °C
S 3 points
S 2 °C
S 120 s
32 °C
S
120 s
S
M stop
M 25 °C
S always
S no
S no
S 100%
S 100%
S 100%
S protection mode
Customer setting
119 / 154