Proxy Arp And Tunnel-To-Tunnel Traffic; Enabling Proxy Arp And Tunnel-To-Tunnel Traffic - Nortel 2212 Installation And Configuration Manual

Proxy ARP and tunnel-to-tunnel traffic

5 Enter a Subnet Mask.
6 Select New.
7 Enter a name for the new pool in the text box.
8 Click Apply to save the details.
9 Click OK.
The User IPaddr window appears, as shown in Figure 13.
Figure 13
Address pool
Use Procedure 6 to enable proxy ARP and tunnel-to-tunnel traffic.
Procedure 6

Enabling proxy ARP and tunnel-to-tunnel traffic

1 In the Contivity Secure IP Services Gateway navigator, select SYSTEM >
Forwarding.
The Forwarding window appears, as shown in Figure 14 on
WLAN Handset 2212
IP address pool configuration
Installation and Configuration for VPN
Page 35 of 62
page 36