Nortel 2212 Installation And Configuration Manual page 20

Page 20 of 62 Getting started
553-3001-229 Standard 1.00
5 Click on the + beside Ports.
The Ports list expands.
6 Right click Communications Ports (COM 1) and select Properties.
The Communications Ports (COM 1) Properties window appears.
7 Select the Port Settings tab.
8 Ensure the settings are configured as shown in Figure 2.
Figure 2
COM1 settings
9 Connect to the wireless gateway through the console cable.
10 Access the wireless gateway using Hyper Terminal.
11 Enter the username and password in the Contivity 1050 Hyper Terminal
window.
The Main Menu window appears, as shown in Figure 3 on
November 2005
page 21