DHCP relay
Use Procedure 4 to enable the DHCP Relay.
Procedure 4
Enabling the DHCP relay
1
In the Contivity Secure IP Services Gateway navigator, select SERVERS
> DHCP Relay.
The DHCP Relay Options window appears, as shown in Figure 10.
Figure 10
DHCP Relay options
2
Select Enabled.
Note: Ensure that you add appropriate routes in your network so that the
DHCP response from the DHCP server reaches the VPN router.
3
Click OK.
WLAN Handset 2212
DHCP options
End of Procedure
Installation and Configuration for VPN
Page 31 of 62