Download Print this page

Gigabit Ethernet - Nortel Versalar 15000 Troubleshooting Manual

Known anomalies
Hide thumbs Also See for Versalar 15000:

Advertisement

Known Anomalies for the Versalar Switch Router 15000
Title:
Deleting ATM Service Records May Result in Intermittent Restarts
Number:
Description:
restarts. This problem is more likely to occur when you delete multiple service
records simultaneously on an ATM interface.
Title:
Incorrect Reserved Bandwidth for ATM When Sustainable Cell Rate Is Set to 0
[New]
Number:
Description:
If you set the sustainable cell rate (SCR) to 0 and enter the
command, the BCC incorrectly displays the reserved bandwidth as 0 cells per second
(CPS). The reserved bandwidth allocated should be equal to the line rate when the
SCR is set to 0.
Title:
New Virtual Path Interfaces Not Included in VPC Count
Number:
Description:
command, the virtual path connection (VPC) count does not include them.

Gigabit Ethernet

Title:
QoS Receive Parameter Capabilities Do Not Support Gigabit Ethernet Levels
[New]
Number:
Description:
or the
Title:
PCAP Shows Source MAC Addresses Returned from Gigabit Ethernet as Zeros
Number:
Description:
then enable packet capture (PCAP) on each side and ping from side to side, PCAP
shows all of the source MAC addresses on the receive packets as zeroes.
12
114019-1
Deleting an ATM service record configured on an OC-3 trunk may cause intermittent
113644-1
106520-1
If you configure new virtual path interfaces, and enter the
112497-2
QoS capabilities do not support gigabit Ethernet levels for either the
parameter for a QoS queue.
rx-burst-rate
115063-2
If you connect two Versalar 15000 switch routers using gigabit Ethernet interfaces,
show atm interface
show atm interface
parameter
rx-cir
302773-E Rev 00

Advertisement

loading