Nortel Versalar 15000 Troubleshooting Manual page 18

Known anomalies

Hide thumbs Also See for Versalar 15000:

Known Anomalies for the Versalar Switch Router 15000

Title:

Documentation Concerning the System Log Is Incorrect [New]

Number:

Description:

(MCD) in Event Messages for the Versalar Switch Router 15000 is incorrect.

Workaround:

The text describing event code 19 should say:

Hardware Config Information key: (A)ccess Processor, (I)FP, (S)SP, (T)runk

Processor; (i)dle, (s)econdary, (p)rimary, (d)pi connect, queue s(w)ap

<previous_config> <current_config>

This message informs you of the status of the data path interconnect (DPI) that

connects the active system services processor (SSP) card and an internet forwarding

processor (IFP) card. (The relevant IFP is the one that handles information and packets

generated on the SSP.) If two SSPs are configured, they are identified as (p)rimary and

(s)econdary. If neither SSP card is active, the status of the DPI is idle.

128421-1

The text describing the event message for event code 19 for the module control driver

302773-E Rev 00

Table of Contents